How to prevent moisture in Huinantian clothes? Huinan
All doors and windows in the home should be closed to prevent outdoor warm and humid air from entering. Some people think that the sun is shining at noon, so they can open windows for ventilation, but in fact, noon is the time when the outdoor temperature is the highest, and the temperature difference between indoor and outdoor is also the largest.
What should I do when I go back to Nantian?
In Huinan weather, some items or food are prone to moisture, and then mildew and rot, so appropriate moisture-proof measures should be taken. How to deal with "Huinan Tian"? Let's take a look together.
Close the doors and windows in advance.
First of all, close the doors and windows in advance. Except for the airtight places, "Huinan Tian" can "baptize" all the spaces. If the fog is filled in the morning and the weather feels that the weather will warm up, "Huinan Tian" may come to report. At this time, all doors and windows in the home should be closed to prevent the outdoor warm and humid air from entering. Some people think that the sun is bright at noon and the windows can be opened for ventilation, but in fact, noon is the time when the outdoor temperature is the highest, and the temperature difference between indoor and outdoor is also the largest. At this time, ventilation can sometimes cause more serious water vapor condensation on the indoor floor and walls. In addition, items that are prone to moisture and mildew should be sealed and stored in advance.
Turn the north wind and open the windows for ventilation.
More than 80% of the "going back to the south" disappeared due to the cold air moving south. If the weather forecast says that there is cold air moving south, and the local wind direction turns to the north, you can open the doors and windows for ventilation. The cool and dry north wind, within half a day, there is a dry floor and walls.
Dehumidifiers are more suitable for indoor dehumidification than air conditioners.
Because the air conditioner dehumidifies the indoor temperature at the same time, the room can be kept dry without opening the window, but it does not eliminate the root cause of water vapor condensation - the indoor and outdoor temperature difference, and even increases it. Once the window is opened, the moisture regain will be more serious. In addition, the indoor temperature is low and the body feels uncomfortable. Using a dehumidifier to dehumidify not only has a large amount of dehumidification, but also does not reduce the indoor temperature. It can avoid the increase of the temperature difference, and the effect is better than that of air conditioners.
How to keep moisture-proof clothes in Nantian
When "Return to Southern Heaven" was rampant, the ground was wet everywhere, and the walls were constantly "sweating". Even the clothes in the wardrobe were not immune. The moisture was heavy and there was a musty smell. The clothes were moldy and damp, and wearing them would cause disease, and it was a pity that those high-end clothes were moldy. What can be done to ensure that the clothes are not killed?
Use special detergents
If the clothes are damp and have mildew spots, they should be dealt with immediately, because the mildew spots have just appeared in the clothes, and they can be completely removed. If the mildew spots penetrate into the fibers of the clothes, it will be difficult to remove.
When cleaning mildew points, choose special laundry products to remove mildew, especially children's clothing, and use special laundry detergent for babies, so that in addition to killing mildew, it will not irritate the baby's skin.
Desiccant and other moisture-proof products come in handy
The more common moisture-absorbing products on the market generally consist of calcium chloride particles as the main content, and most of them also add flavor ingredients, which can integrate functions such as dehumidification, aroma, anti-mildew, and deodorization. Moisture-absorbing boxes are mostly used for moisture absorption in wardrobes and shoe cabinets, and only need to be placed in the cabinet when using them.
Different materials of clothes have their own countermeasures
① Cotton clothes:
Cotton clothes are easy to absorb water. You can seal them with waterproof bags of film plastic or nylon fabrics and store them in the wardrobe, and put a small amount of desiccant to reduce the frequency of opening the wardrobe. Once damp, small clothes can be dehydrated by the washing machine and dried with a hair dryer; large clothes can be washed in the dry cleaner and dried by a professional dryer. And high-end clothes are damp, it is best to dry them immediately to prevent them from further dampness.
② Genuine leather products:
Fur clothing is generally made of animal fur such as mink, fox, rat, sheep, roe deer, and beaver. If the fur is accidentally soaked or stained, it must be treated promptly, wiped off with a dry cloth, and then placed in a dry and ventilated place to dry.
During the wearing and storage of fur coats, the most feared thing is moisture, especially after the fur board encounters water, it is easy to mold, rot, and lose hair. The lightest impact will also harden the leather board. Once the fur is stained with water or damp, it must not be roasted or ironed with an iron to avoid shrinkage, hardening, and even cracking of the leather board.
Put the clothes in a dry place to air dry, and then brush the fluff with a soft brush, so that the fur clothes can be restored to their original appearance.
Before storing the fur coat, it should be dried for 2-3 hours, and then stored after the residual heat dissipates. When drying, special attention should be paid to the fact that the fur should not be directly exposed to the sun, and it is best to cover it with a layer of cloth to ensure the luster of the fur; otherwise, exposure to the sun can easily make the leather plate hard and age, causing the leather to lose elasticity.
Drying with a dryer
If you find any signs of moisture in the clothes, immediately remove them from the wardrobe and hang them in a ventilated place to prevent further moisture. If there is a dryer at home, you can dry them. If there is no drying equipment at home, you can use a hair dryer to dry them.
How to deal with mildew on the wall in Nantian
Walls moldy This is very easy to happen in the south, especially in the spring when the tide returns. When the warm air in spring encounters the cold walls, it condenses into liquid water, and our walls are prone to mildew and hairs. Moldy walls not only affect our home beauty, but also easily cause the human body to be sensitive to mold spores. Walls moldy has so many hazards, what should we do?
Prevention and control measures for moldy walls:
1. Open windows as little as possible during humid weather. In addition, try to keep the walls dry. In humid weather, you can use dehumidifiers, air conditioners, and fans to absorb moisture from the walls. Once water vapor appears on the walls or furniture, it should be wiped off immediately with a dry rag.
2. When mildew has appeared on the wall, you can first use a (dry) toothbrush to brush away the mildew stains, and then gently wipe it with a soft cloth dipped in alcohol, which can dry the wall and prevent the growth of mold.
3. Add bleach (powder) and water to the spray bottle at a ratio of 1:99, and spray it on the moldy wall to immediately solve the problem of moldy wall.
360 Common Sense Network Tips: According to experts' advice on how to deal with moldy walls, the most effective measure is to ventilate more to keep the air in our room flowing smoothly.
Huinantian floor moisture-proof
In the wet season, home decoration may be affected mainly in two places, namely wooden floors and walls. With the improvement of moisture-proof technology, as long as the moisture-proof work is done in place at the beginning of the decoration, most of them will not be affected by moisture in the later stage. So how can the floor be moisture-proof in Huinan weather?
Do not lay floors in the wet season
Select the season for laying wooden floors to ensure that each piece of natural wooden floor laid on the ground forms a good bonding force and is not susceptible to arching deformation due to environmental influence.
In general, it is best to lay wooden floors in the dry and moderate autumn, because wooden floors are more susceptible to physical factors such as thermal expansion and contraction. If laid in summer, the wooden floor will expand to a certain extent due to the high room temperature at this time. Once the temperature drops, there may be more obvious gaps. On the contrary, if paved in the cold winter, it may expand and bulge in summer.
Do a good job in floor maintenance
The easiest way to prevent moisture on the surface of wooden floors is to wax the wooden floor. Waxing can not only make up for the scars left by the wooden floor in daily life, but also improve the brightness of the floor. At the same time, the wax itself has waterproof and moisture-proof functions. The number of waxing can vary from old and new floors. The new wooden floor is played every half a month or a month. After 3-4 consecutive waxes, you can make up the wax every six months like the old floor, so that it can effectively prevent moisture. In addition, if the home is laid with solid wood floors, you can also consider adding a layer of transparent varnish to the surface, but the process of applying varnish is extremely demanding. If the construction team is not meticulous enough, it may have the opposite effect.
Activated carbon at the bottom of the floor
When laying the floor, you should first sprinkle insect-proof powder on the dry ground, and then lay a layer of thick moisture-proof film, because the moisture-proof film is generally about 5-10 mm thick, which can effectively prevent the penetration of underground moisture. At the same time, you must also take into account the position of the foot of the wall, and must not affect the finishing because of the local. If you want to prevent moisture more thoroughly, you can lay another layer of activated carbon, which not only effectively prevents the floor from deforming, but also absorbs indoor smoke and odor, absorbs carbon dioxide, and improves the air quality in the room.
Remedy after damp floor
If the moisture-proof measures are not too good, there are remedies. You can use a dehumidifier, or turn on the dehumidification function of the air conditioner, and the moisture-proof effect is also good. If it is a small apartment, you can try an activated carbon bag, which can absorb water and remove odors.
If the wooden floor is moldy, it can be diluted in a ratio of 1:3 with soft bleach, and then wiped with a rag to restore the wooden floor to its original state.
What should I do when I go back to Nantian Computer?
In addition to making people feel depressed, even household electrical products will lose their temper and malfunction. Every year, a considerable number of computers will malfunction due to moisture. The severity of the malfunction is proportional to the degree of humid weather in Huinan. Therefore, we must avoid computer malfunctions due to moisture in Huinan.
1. Keep the computer host away from walls, floors, and other places that are prone to moisture: When the weather returns to the south, walls, floors, etc. are prone to moisture, and there are a lot of water droplets. The computer host should be kept away from these places as much as possible. If we can stay away from these places, we can reduce the chance of the computer getting wet to a certain extent. If it cannot be avoided, open the computer case and blow away the humid air inside the host with a hot hair dryer before turning on the computer.
2, the computer host is most susceptible to moisture accessories in addition to the computer main board, the most worthy of concern should be the computer host power supply, because the host power supply inside the electronic parts are particularly many, and the host power supply internal circuit is complex, the power supply volume is limited, so it inside the moisture is the most difficult to remove, so the humid weather will appear very serious power failure, in the use of hair dryer to blow away the internal moisture of the host, we should also use hair dryer to take care of the computer host power supply.
3. Be careful when turning on the computer in humid weather. If you hear an abnormal sound from the host or LCD monitor, or smell a peculiar smell, we should immediately disconnect the power supply of the computer host and dial the computer maintenance service hotline.
What are the precautions for returning to Nantian?
In Huinan weather, we will encounter all kinds of things. In Huinan weather, what should we pay attention to? I will take you to understand.
Health Alert: Beware of Respiratory Diseases
Humid and foggy weather can easily cause the recurrence of rheumatism, joint pain and muscle pain, so citizens with these diseases need to keep warm. Patients with chronic diseases such as hypertension should take medicine on time, monitor blood pressure, and pay attention to preventing the emergence of diseases such as stroke.
In addition, "cold spring" weather can easily lead to upper respiratory tract infections, tonsillitis and other diseases, and humid weather is also a season when skin diseases such as eczema, chapped, dermatitis, and athlete's foot are frequent. Citizens should pay attention to prevention.
Don't open the south window when there is sunshine at noon.
To close the doors and windows in advance, first prevent and then treat to prevent the outdoor warm and humid air from entering. Some people think that the sun is shining at noon, so they can open the windows for ventilation, but this approach cannot relieve the humid phenomenon. Noon is the highest outdoor temperature, and the temperature difference between indoor and outdoor is also the largest. Ventilation at this time sometimes causes more serious water vapor condensation on the indoor floor and walls.
Travel reminder: Driving in rain and fog should slow down
In humid weather, pay special attention to the visibility of driving, check the safety and technical status of the vehicle, especially the braking system, dry the rearview mirrors, headlights, and taillights, turn on the fog lights, low beams, width indicator lights, and taillights as required to remind the rear vehicles, and use a wiper to clean the front windshield of the car in time, and appropriately reduce the speed. Avoid using high beams in foggy days to avoid the light being reflected by fog in front of the car into a blank, but the vehicle in front cannot be seen clearly.
The bathroom door is closed.
To avoid water vapor spreading to other parts of the room. After cooking or taking a shower, remember to close the kitchen door and toilet door, and turn on the exhaust fan to reduce moisture entering the living room.
