How to clean the range hood? clear
The range hood is a kind of kitchen appliance that purifies the kitchen environment. Installed in the kitchen, it is healthy and energy-saving. The range hood is above the stove, which can quickly remove the waste from the stove and the harmful oil fume generated during the cooking process, discharge it outdoors, reduce pollution, purify the air, and have the functions of anti-virus and explosion-proof safety. The kitchen is the most frequently used place in the home, and it is also the most prone to dust and scale. The range hood stained with oil has a feeling that it is not clean no matter how much it is cleaned.
1. Fan blades
Spray the special cleaner on the fan blade and let it stand for 3 minutes; boil a pot of water until it boils, and align the water vapor with the fume extraction port, then turn on the range hood, and use the principle of centrifugal force to make the remaining oil on the fan blade flow into the oil collecting cup; turn off the switch, wipe it with a clean rag, and the fan blade will be cleaned immediately.
Step 2 Filter
Remove the fan blades, soak them in warm water with a special detergent, and let them stand for about 10 minutes. Wipe them with a rag and gently wipe off the oil stains. If there is still stubborn tar adhesion, you can use a toothbrush dipped in a little strong oil detergent and then gently brush them. Clean them with clean water.
3. Oil storage tank
If you find that the oil collecting cup is 6 points full, you should start to remove it; pour out the accumulated waste oil; soak the oil collecting cup in warm water and detergent for 3 minutes, and then wipe it off with a rag; add a new disposable oil box with a smaller size in the oil storage box (sold in supermarkets), and discard the disposable oil box next time you clean it, it will be more convenient to clean it up.
Precautions for cleaning range hoods
Ordinary residents do not understand electricity, and it is easy to get water in during the dismantling and washing process, resulting in a short circuit of the motor. It is best to dismantle and wash the range hood, remove the main parts of the range hood, and clean it with a special detergent. After it is completely dried, professionals will assemble the range hood back and try it on the spot to ensure normal and intact.
The best way to clean a range hood is also to use the word "anti". Before starting the new range hood, sprinkle a thin layer of soap powder in the two oil storage boxes, and then inject about one-third of the water. In this way, the recovered oil will float on the water surface instead of condensing on the wall of the box. Wait until the waste oil is full and then pour it out.
