What is the working principle of a mosquito killer lamp?
1. The principle of mosquito killer lamps
Mosquitoes are a kind of phototropism, using carbon dioxide and sex-seeking pheromones to find targets, and like swarms of insects Diptera mosquitoes. Science has proved that carbon dioxide exhaled by humans is a substance that attracts mosquitoes to the human body. Mosquito killer lamps are invented and made according to this characteristic. Without any chemicals, caught mosquitoes are usually air-dried or die naturally, which is a very environmentally friendly way to kill mosquitoes.
2. Classification of mosquito killer lamps
The types of mosquito killer lamps can be divided into three types: sticky trap mosquito killer lamps, electronic mosquito killer lamps, and airflow mosquito suction lamps.
① Sticky catch mosquito killer lamp: no bad smell of burning; no sound and electric shock sparks; bug carcasses will not decompose and scatter due to electric shock, causing environmental pollution; no high-voltage power grid, safe to use.
② Electronic mosquito killer lamp: limited viewership of circuit design; simple and low power consumption; high performance; as long as the power supply is turned on, it can be used.
③ Airflow mosquito killer lamp: generally small in size; can be carried with you; generally used in households.
The principle and precautions for using mosquito killer lamps
3. How to use mosquito killer lamps
① Place the mosquito killer lamp in an open place one meter high. When the environment is dark and static, the mosquito killer has the fastest mosquito killing speed and the best effect.
② The usable area is 50m2~ 60m2 indoors and 100m2 outdoors. For the first time, it is best to choose when it is just dark in the evening, close the doors and windows or screen doors and windows, turn off the lighting lights and leave, centrally kill mosquitoes for 2 to 3 hours, and people go back indoors without stopping until the next morning, for 1 to 2 consecutive weeks. During summer or mosquito activities, it can be used every day to eliminate mosquitoes that are not strictly leaked into the room.
③ For use in offices and business places, you can turn on the mosquito-killing device and turn off the lights before get off work in the evening. After trapping overnight, indoor mosquitoes can be basically eliminated.
4. Precautions for mosquito killer lamps
① Before use, it is necessary to check whether the voltage and frequency of use are consistent with the product, and use a power socket that is compatible with the product. The socket ground wire must be well grounded, then connect the power supply, turn on the power switch, and see the purple light in the lamp tube. When the fly and mosquito control work has started.
② The usable area is 50m2~ 60m2 indoors and 100m2 outdoors. For the first time, it is best to choose when it is just dark in the evening, close the doors and windows or screen doors and windows, turn off the lighting lights and leave, centrally kill mosquitoes for 2 to 3 hours, and people go back indoors without stopping until the next morning, for 1 to 2 consecutive weeks. During summer or mosquito activities, it can be used every day to eliminate mosquitoes that are not strictly leaked into the room.
③ After using the lamp for a period of time, when you see that the base under the lamp has accumulated a lot of mosquito and fly residues, you should clean it up in time. When cleaning, you must first cut off the power supply, hold the screwdriver insulation part, and use the metal rod of the screwdriver to contact the two network wires between the power grids for disconnection and discharge. Then press the extranet with your thumbs, remove the rear net, and remove the chassis for cleaning.
④ When cleaning the fly killer and mosquito killer lamp, be sure to cut off the power supply and discharge the high-voltage power grid with a screwdriver. When discharging, you must hold the insulating part of the screwdriver in hand to prevent electric shock.
⑤ When killing flies and mosquitoes, electric sparks will be generated during operation, so all dusty places and places with flammable and explosive possibilities are strictly prohibited to avoid accidents.
