Description 1-Ethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide is a class of electrolytic materials that can be used in the fabrication of lithium-ion batteries. Lithium-ion batteries consist of anode, cathode, and electrolyte with a charge-discharge cycle. These materials enable the formation of greener and sustainable batteries for electrical energy storage.Ionic liquids (ILs) are molten salts with melting points lower than 100 °C. They usually consist of pair of organic cation and anion. ILs exhibit unique properties such as non-volatility, high thermal stability, and high ionic conductivity and find applications as electrolytes in lithium/sodium ion batteries and dye-sensitized solar cells. They are also used as media for synthesis of conducting polymers and intercalation electrode materials.
All
Chemical Reagents
Biomedicine
Organic raw materials
Inorganic chemical industry
intermediate
Agricultural chemicals
Auxiliaries and catalysts
Fragrances and Flavors
Dyes and Pigments
Daily chemical industry
1-Ethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide
Dangerous GoodsCAS number：223436-99-5 molecular formula：C9H16F6N2O4S2
overview
compound introduction
Specs
| Chinese alias | 1-乙基-1-甲基吡咯烷-1-鎓双[(三氟甲基)磺酰基]亚胺 | 1-乙基-1-甲基吡咯烷鎓双[(三氟甲基)磺酰基]亚胺 | 1-乙基-1-甲基吡咯烷鎓双(三氟甲磺酰基)酰亚胺 | N-乙基-N-甲基吡咯烷鎓双(三氟甲磺酰基)酰胺 | 1-乙基-1-甲基吡咯烷-1-鎓双三氟甲基磺酰亚胺 | ||
| English alias | DTXSID1047940 | 1-Ethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, 99% | Tox21_200625 | 1-Ethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, >=99%, H2O <500 ppm | F87861 | bis(trifluoromethylsulfonyl)azanide;1-ethyl-1-methylpyrro | ||
| CAS number | 223436-99-5 | molecular formula | C9H16F6N2O4S2 |
| molecular weight | 394.35 g/mol | Exact mass | ≥99% |
| PSA | 86.000 Ų | logp | - |
numbering system
No numbering system information yet
physicochemical properties
No physical and chemical property information yet
Safety information
pictogram：
GHS06 , GHS05
Signal word：
Danger
Hazard Statement：
H301: 吞咽会中毒 H311: 皮肤接触有毒 H314: 造成严重的皮肤灼伤和眼睛损伤
Statement of Preventive Measures：
P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。 P302+P352: 如皮肤沾染：用水充分清洗。 P321: 特殊处理（请参阅此标签上的...）。 P405: 密闭存放 P501: 将内容物/容器处理到。。。 P264: 处理后要彻底洗手。 P260: 不要吸入灰尘/烟雾/气体/雾/蒸汽/喷雾。 P270: 使用本产品时，请勿进食、饮水或吸烟。 P301+P330+P331: 如误吞咽：漱口。不要诱导呕吐。 P304+P340: 如误吸入：将人转移到空气新鲜处，保持呼吸舒适体位。 P363:
WGK Germany：
3
Personal protective equipment：
Eyeshields， Faceshields， full-face particle respirator type N100 (US)， Gloves， respirator cartridge type N100 (US)， type P1 (EN143) respirator filter， type P3 (EN 143) respirator cartridges
Production methods and uses
No production method and use information yet
Related
upstream information
No upstream information yet
downstream information
No downstream information yet
MSDS
Found 1 shareMSDS
223436-99-5 | bis(trifluoromethylsulfonyl)imide, ≥ 99%, H2O < 500ppm1-ethyl-1-methylpyrrolidiniumbis(trifluoromethylsulfonyl)imide, ≥ 99%,H2O < 500 ppm.pdf
