应用 适用性 原理 制备说明 典型加工指南将 Smart′Ink S-CS01130 导电油墨加热至室温（约 10 分钟）并在超声波浴中放置 5 分钟以除去任何聚集物。在 0.45 μm PTFE 针头式过滤器上过滤，以避免任何喷嘴堵塞。Qualified printheads: RICOH (MH5420), XAAR (1003 GS6, 128), KONIKA MINOLTA (KM512SHx, KM1024iMHE, KM1024LHB), FUJIFILM (Dimatrix DMP series cartridge)Storage stability: 6 months (fridge)Sintering conditions:Tunnel furnace: 120°C/5min for 20mW.cm; 150°C/5min for 6mW.cm; 180°C/5min for 3.8mW.cm; 200°C/5min for 2.8mW.cm.NIR: few seconds for 4-10mW.cm.Photonic curing: 外形 Description Smart′Ink S-CS01130 conductive ink was developed for the printed electronics, is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on silver, is perfectly adapted to design conductive traces on flexible substrates. Also, it is shaped for IoT application which required antennas (HF, UHF).Smart′Ink S-CS01130 conductive ink shows improved jetting performance and is successfully used on different tools such as Drop on Demand (DOD) inkjet printer FUJIFILM Dimatix, or such as digital micro-dispensing inkjet printer Microdrop and Microfab.
All
Chemical Reagents
Biomedicine
Organic raw materials
Inorganic chemical industry
intermediate
Agricultural chemicals
Auxiliaries and catalysts
Fragrances and Flavors
Dyes and Pigments
Daily chemical industry
Silver nanoparticles ink for inkjet printing
CAS number：unknown molecular formula：
overview
compound introduction
Specs
| Chinese alias | - | ||
| English alias | Smart’Ink S-CS01130 conductive ink, Conductive ink, Ag ink | ||
| CAS number | unknown | molecular formula | |
| molecular weight | - | Exact mass | - |
| PSA | - | logp | - |
numbering system
No numbering system information yet
physicochemical properties
No physical and chemical property information yet
Safety information
No safety information yet
Production methods and uses
No production method and use information yet
Related
upstream information
No upstream information yet
downstream information
No downstream information yet
MSDS
Found 0 shareMSDS
