ABS 3D printing filament

Dangerous Goods

CAS number：9003-56-9 molecular formula：C15H17N

overview

Specs

numbering system

physicochemical properties

Safety information

Production methods and uses

MSDS

overview

compound introduction

制备说明 Recommended Print Conditions: Extruder Temp: 220-240°C, ideal 230°C. Bed Temp:100-110°C. Bed Preparation: Polyimide Tape, ABS/Acetone Slurry General Description 3DXTech ™ ABS is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.

Specs

Chinese alias	-
English alias	acrylonitrile-butadiene-styrene \| butadiene styrene acrylonitrile \| Q143496 \| SCHEMBL15661 \| XECAHXYUAAWDEL-UHFFFAOYSA-N \| styrene-butadiene acrylonitrile \| Acrylonitrile-butadiene-styrene terpolymer \| buta-1,3-diene;prop-2-enenitrile;styrene \| ABS \| Acry
CAS number	9003-56-9	molecular formula	C15H17N
molecular weight	211.3 g/mol	Exact mass	自然的，diam. 2.85毫米
PSA	23.800 Å²	logp	-

numbering system

No numbering system information yet

physicochemical properties

No physical and chemical property information yet

Safety information

pictogram：

GHS07

Signal word：

Warning

Hazard Statement：

H315: 引起皮肤刺激 H319: 引起严重眼睛刺激 H335: 可能引起呼吸道刺激 H302: 吞食有害

Statement of Preventive Measures：

P261: 避免吸入灰尘/烟雾/气体/雾/蒸汽/喷雾 P305+P351+P338: 如进入眼睛：用水小心冲洗几分钟。如戴隐形眼镜并可方便地取出，取出隐形眼镜。继续冲洗。 P280: 戴防护手套/穿防护服/戴防护眼罩/戴防护面具。 P302+P352: 如皮肤沾染：用水充分清洗。 P321: 特殊处理（请参阅此标签上的...）。 P405: 密闭存放 P501: 将内容物/容器处理到。。。 P264: 处理后要彻底洗手。 P271: 仅在室外或通风良好的地方使用。 P270: 使用本产品时，请勿进食、饮水