柠檬酸钠-EDTA抗原修复液（40X）

生物试剂/缓冲液

柠檬酸钠-EDTA抗原修复液 | 抗原修复液

Citrate-EDTA Antigen Retrieval Solution (40X)

Citrate-EDTA Antigen Retrieval Solution (40X)

C752118-100ml

100ml

无菌过滤

40X

2-8°C储存

冰袋运输

Store at 2-8℃ for 12 months. Store at -20℃ for 24 months. Upon receipt, it is recommended to aliquot. Avoid freeze/thaw cycle.

产品介绍 ： 柠檬酸钠-EDTA抗原修复液(40×)具有修复多聚甲醛等固定液引起的蛋白交联，防止由于抗原位点的遮蔽导致的免疫染色的信号减弱或者抗原识别错误导致的假阳性染色结果，充分暴露石蜡切片等样品中的抗原表位，从而大大改善免疫染色效果。适用于石蜡切片、冰冻切片等样品。 操作流程： 1、试剂准备使用前须用蒸馏水或超纯水稀释柠檬酸钠-EDTA抗原修复液(40×)，配成抗原修复液(1×)。 2、抗原修复 2.1对于石蜡切片： 2.1.1脱蜡：切片在二甲苯中脱蜡2×5min。无水乙醇2×5min。90%乙醇2×5min，70％乙醇5min。蒸馏水2×5min。 2.1.2抗原修复：将切片浸泡于抗原修复液(1×)中，95-100°C加热约10~30min(最佳的加热时间需根据不同的样品和目的蛋白自行摸索)。 注：抗原修复液(1×)使用前需预热到95-100°C。加热可以使用水浴锅或微波炉。如果使用微波炉加热，需注意避免修复液暴沸。随后大约在20~30min冷却至室温。用免疫染色洗涤液洗涤1~2次，每次3~5min。即可进行封闭等后续的免疫染色步骤。 2.2冰冻切片：用免疫染色洗涤液洗涤切片5min。抗原修复的过程如石蜡切片的抗原修复过程。 2.3其它样品的抗原修复，可以参考石蜡切片的步骤进行。 温馨提示：为了您的自身安全，使用试剂前，请做好防护，如穿实验服，带手套等。 Sodium citrate -EDTA antigen repair solution (40×) can repair the protein cross-linking caused by fixed solution such as paraformaldehyde, prevent the signal weakening of immunostaining caused by the masking of antigen sites or false positive staining results caused by antigen recognition errors, and fully expose the antigen epitope in paraffin sections and other samples, thus greatly improving the effect of immunostaining. Suitable for paraffin section, frozen section and other samples. Procedure : 1. Before the reagent is ready for use, sodium citrate -EDTA antigen repair solution (40×) must be diluted with distilled water or ultra-pure water to form antigen repair solution (1×). 2. Antigen Repair 2.1 For paraffin sections: 2.1.1 Dewaxing: Sections are dewaxed in xylene for 2×5min. Anhydrous ethanol 2×5min. 90% ethanol 2×5min, 70% ethanol 5min. Distilled water 2×5min. 2.1.2 Antigen repair: The section is immersed in antigen repair solution (1×) and heated at 95-100°C for about 10~30min(the best heating time should be determined according to different samples and target proteins). Note: Antigen repair solution (1×) should be preheated to 95-100°C before use. Heat can be done in a water bath or microwave. If using microwave oven heating, pay attention to avoid the repair solution boiling. Then cool to room temperature in about 20 to 30 minutes. Wash with immunostaining detergent 1~2 times, 3~5min each time. Subsequent immunostaining steps such as blocking can be performed. 2.2 Frozen section: The section was washed with immunostaining detergent for 5min. The process of antigen repair such as the process of antigen repair in paraffin sections. 2.3 The antigen repair of other samples can be carried out by referring to the steps of paraffin section. Tips: For your own safety, please take good protection before using the reagent, such as wearing a lab coat, wearing gloves, etc.