Enterococcus color plate 9cm
[Number]: VIP (HB) PM7014-1
[Product name]: Enterococcus color plate 9cm
[Specifications]: 9cm * 10 pcs/bag
[Purpose]:
[Product name]: Enterococcus color plate 9cm
[Specifications]: 9cm * 10 pcs/bag
[Purpose]:
Enterococcus color plate 9cm (2-8 ℃)
Part Number: VIP (HB) PM7014-1
Specifications: 9cm * 10 pcs/bag
Uses: For rapid detection of enterococcus in food, water and environment. Colony is red to purple, other bacteria are colorless, yellow or inhibited.
Enterococcus color plate 9cmComposition (g/L)
Enterococcus color plate 9cmusage
Weigh 56.4g of this product, heat it in a water bath and dissolve it in 1000ml of distilled water, cool it to 45-50 ° C, pour it into a sterile flat dish, and set aside. No autoclaving required;
Operation steps
Before use, place the prepared medium at room temperature for 10 to 20 minutes.
1. Prepare according to national standards, SN standards, FDA standards or other methodssample solution;
2. Take 1ml of the sample solution and add it to the enterococcus color-developing medium cooled to 45-50 ° C, mix well or apply it on a plate; or take the sample solution and inoculate it on the enterococcus color-developing medium by scribing;
3. Cultivate at 36 ° C for 24-48 hours, select a plate with 30-200 colonies, and count the red to purple colonies that appear on the plate.
Quality Control
1. Appearance
The powder of this drying medium is uniform, has good fluidity, and is light yellow to milky white. The prepared plate was transparent and light yellow medium.
2. Microbial testing
Incubate at 36 ° C for 24-48h:
typical features
Typical colonies range from red to purple.
storage
The prepared plate should be used immediately, and direct light exposure should be avoided. The drying medium should be placed in a dark and dry place, and the storage temperature should be 2-8 ° C, and it should be stored away from light.
failure
Dry media should not be used beyond shelf life, clumping, or color changes.
Attention
This medium is for laboratory use only.
Microbial sensitivity test of Enterococcus coloring medium:
Prepare the media according to the label usage, inoculate the following quality control strains, and place them at 36 ± 1 ° C for aerobic culture for 24-48 hours.
Note: When calculating the collection rate, TSA agar was used as the control medium.
Statement: This reference substance and standard is measured by the central inspection: provide website inquiry and purchase services
Note: Click cas, or search: name, number, cas can display the price.
Previous:Bacillus cereus coloring medium (




